INTRODUCTION

ZJT008 wall panel polymer mortar is a one-component product which made from special kind of polymer & related additives and anti- crack material. Mix the anti-crackmortar with water into a paste in a ratio when using, it has excellent crack resistant per-formance after cured. And it is green easy to work, cost low, is a optimization productfor EPS cement sandwich wall paneljoints.

FEATURE

This product is a new type of anti cracking material, which solves a major problem thathas been puzzling the construction industry -the cracking problem of the light body in.sulation laver. lt is a high-quality environmental protection material with high tensilestrength, easy construction and anti freezing. At the same time, it has the advantages ofgood flexibility, high bonding strength and cracking resistance.

APPLICATION

Mainly used for exterior wall external insulation or internal insulation layer, cover ofpolystyrene board, extruded board and other external layers.

USAGEMix this product with clean water in the ratio of 1:0.4, stir well and then use it.

BASE COURSE TREATMENT

The surface of the pasted insulation board should be as flat, clean and solid as possible.and can be polished with coarse sandpaper if necessary. The insulation boards shall becompacted, and the possible board joints shall be leveled with insulation performanceand rubber powder polystyrene particle insulation mortar. Use a stainless iron steelplastering knife to plaster and press the crack resistant mortar on the insulation boardpress the glass fiber mesh cloth into the insulation plastering mortar and level it. Themesh cloth connection should be overlapped, the overlapping width is 10em, the glassfiber cloth must be completely buried, and the thickness of the fiber reinforced surfaceis about 2-5cm.

Produce base on standard JG/T547-94 Guarantee period:The sealed product should stored in a dry,shade and ventilated environment, and the shelf life of theproduct is one year under normal storage andtransportation conditions.